Calculating the resonant frequencies of the Pyramids.

[mjlabadia]

  Greetings all,

     I was wondering if there were any engineering/physics investigations into the resonant frequencies of the various pyramids and their chambers.

     (Moderators: I was unsure where to post this thread. Please feel free to move it to a more appropriate sub-forum.)

     It would provide strong confirmation to the brief operational theory outlined in the Law of One. This would be especially so if the chambers resonated at some harmonic, multi-order, or inter-modulation mode. 

    It would be enhanced even further if the inter-chamber passages had wave-guide mode resonances, relating to these harmonic or heterodyned (Mixed Sum/Difference), frequencies.

    At radio frequencies, the resonant frequencies of parabolic and pyramid type radiators while complex,....are clearly defined. 
 
  Equilateral Pyramid shapes are still used for impedance transformation in wave-guides, and as actual antennas at high U.H.F up through Microwave frequencies. 
 
They are just much smaller than the Pyramids,.....there is a good chance your Microwave oven has a little copper pyramid, mounted directly on it's Magnetron or Klystron Tube as a Wave-guide. It's usually direct coupled to the Anode and is what focuses the energy into the un-tuned cooking cavity.

    However, at audio frequencies, and using air vibration as opposed to electro-magnetic,.....there isn't any formula I can easily work with. There are cone, rectangular, and cylinder formulas.
  But,..... I don't see why I can't extrapolate the Radio Formula down to vibratory audio by merely changing the propagation velocity to that of the speed of sound.

 (However, I'm not convinced I should disregard the electro-magnetic resonant frequencies, which of course would be very different.)

 I have the following questions which could help me in doing this:

 1)- Was Ra referring to Electro-Magnetic "vibrational" energy or Aural "vibrational" energy? Am I missing something regarding this in the LOO?

 2)- Where is the directional source or locus of the vibrational energy,....from above or below,.....or from a sub-woofer in the back of a Toyota Camry?   

 2)- Does anyone know were I can find accurate measurements of a particular Pyramid as a whole, it's chambers, and the inter-connecting passages?

 3)- Has this already been attempted? If so,...is there anywhere I can find the actual data.

   Any help would be greatly appreciated.

 I can visualize this from an engineering standpoint very clearly. I just need some numbers to work with. 

 If I can figure out the Standing Waves,..... then learn where the chambers were located within those Standing Waves,...and can find some correlation between the resonant frequency of each chamber, and which Mode of Standing Wave peaks at the coordinates of each chamber,...it would truly mean something amazing.

 It could very well confirm what most of us here believe the purpose of the Pyramids were. 

 I just can't buy they were merely the equivalent of some ancient ruler's gigantic, post-humus graffiti tag.

[AnthroHeart]

The great pyramid has something to do with Phi ratio. Or the golden mean.

Maybe something to do with the Schumann Resonance.

[seven]

Interesting thread! As of the questions, I might be able to shed a little light upon them at least

1) They were referring to electromagnetic energy, is the conclusion I draw from these quotes.

"The balancing pyramidal structures were charged with crystals which drew the appropriate balance from the energy forces streaming into the various geometrical centers of electromagnetic energy which surround and shape the planetary sphere."

"This chamber worked upon the mind and the body. The mind was affected by sensory deprivation and the archetypical reactions to being buried alive with no possibility of extricating the self. The body was affected both by the mind configuration and by the electrical and piezoelectrical properties of the materials which were used in the construction of the resonating chamber."

But I would picture what you call "Aural vibrational energy" as a more fine/higher frequency of the detectable electromagnetic energy. Simply in a higher frequency. I believe Light is the foundation of all these energies, and when vibrating in a specific fashion, forms the electromagnetic energy.

2) From below, it is described in this quote:
"The first notion of upward spiraling light is as that of the scoop, the light energy being scooped in through the attraction of the pyramid shape through the bottom or base. Thus the first configuration is a semi-spiral."

Good luck Have you seen The Code by Carl Munck? I think he touches a little upon this subject, it's on youtube. Bruce Cathie also did some major research upon the harmonics of the earth and also the pyramid structures, I think his works might be worth checking out.

[The_Tired_Philosopher]

  Greetings all,

     I was wondering if there were any engineering/physics investigations into the resonant frequencies of the various pyramids and their chambers.

     (Moderators: I was unsure where to post this thread. Please feel free to move it to a more appropriate sub-forum.)

     It would provide strong confirmation to the brief operational theory outlined in the Law of One. This would be especially so if the chambers resonated at some harmonic, multi-order, or inter-modulation mode. 

    It would be enhanced even further if the inter-chamber passages had wave-guide mode resonances, relating to these harmonic or heterodyned (Mixed Sum/Difference), frequencies.

    At radio frequencies, the resonant frequencies of parabolic and pyramid type radiators while complex,....are clearly defined. 
 
  Equilateral Pyramid shapes are still used for impedance transformation in wave-guides, and as actual antennas at high U.H.F up through Microwave frequencies. 
 
They are just much smaller than the Pyramids,.....there is a good chance your Microwave oven has a little copper pyramid, mounted directly on it's Magnetron or Klystron Tube as a Wave-guide. It's usually direct coupled to the Anode and is what focuses the energy into the un-tuned cooking cavity.

    However, at audio frequencies, and using air vibration as opposed to electro-magnetic,.....there isn't any formula I can easily work with. There are cone, rectangular, and cylinder formulas.
  But,..... I don't see why I can't extrapolate the Radio Formula down to vibratory audio by merely changing the propagation velocity to that of the speed of sound.

 (However, I'm not convinced I should disregard the electro-magnetic resonant frequencies, which of course would be very different.)

 I have the following questions which could help me in doing this:

 1)- Was Ra referring to Electro-Magnetic "vibrational" energy or Aural "vibrational" energy? Am I missing something regarding this in the LOO?

 2)- Where is the directional source or locus of the vibrational energy,....from above or below,.....or from a sub-woofer in the back of a Toyota Camry?   

 2)- Does anyone know were I can find accurate measurements of a particular Pyramid as a whole, it's chambers, and the inter-connecting passages?

 3)- Has this already been attempted? If so,...is there anywhere I can find the actual data.

   Any help would be greatly appreciated.

 I can visualize this from an engineering standpoint very clearly. I just need some numbers to work with. 

 If I can figure out the Standing Waves,..... then learn where the chambers were located within those Standing Waves,...and can find some correlation between the resonant frequency of each chamber, and which Mode of Standing Wave peaks at the coordinates of each chamber,...it would truly mean something amazing.

 It could very well confirm what most of us here believe the purpose of the Pyramids were. 

 I just can't buy they were merely the equivalent of some ancient ruler's gigantic, post-humus graffiti tag.

I pray and hope to be as intelligent as you one day...

Can you provide what Ra Quotes your questions are referring to so we can more accurately provide answers?

The Great Pyramid was measured to the T, I'll see if I can find an article stating its measurements AS WELL AS how they are in accordance with sacred geometry, PHI, and how its essentially a square circle (yet not a cylinder lol).

I really need to get an education...

[Kaaron]

I second that looking into Bruce Cathie's research will help you

[4C2N0]

https://phys.org/news/2018-07-reveals-gr...focus.html