(03-12-2011, 06:52 PM)Namaste Wrote: Graham Hancock (wonderful being) mentioned a tale from an older expedition to Giza. A scientist ventured to the top of the Great Pyramid with some helpers. He felt electricity in the air, and made a very crude conductive device from a wine bottle.

Electricity hissed from the bottle, to the point the helpers (native Egyptians) thought he was a sorcerer :¬)

There is an excellent documentary called The Pyramid Code which also goes into the conductive elements of its construction.

(03-13-2011, 05:46 AM)Namaste Wrote: Yes indeed, the Great Pyramid offers much, much more than electrical charge. Imagine viewing it with metaphysical eyes, watching the energy spiral and charge/change the physical.

(03-13-2011, 05:46 AM)Namaste Wrote: According to the research in the Pyramid Code (along with words from the knowledge keeper, who has passed away now), they used running water and sunlight to generate power.

Quote:I assume in a similar fashion to how power stations these days work?

(03-12-2011, 05:16 PM)0lin Wrote: Just build a pyramid of apex angel of 76°18' with crystal materials and put it parallel with the magnetic field of earth, energy can be collected in high efficiency. The larger the pyramid is, the more can energy be collected.

(03-12-2011, 05:16 PM)0lin Wrote: Nothing is more powerful than the H-bomb.

(03-12-2011, 05:16 PM)0lin Wrote: It's funny that this energy can be used for healing and constructing, but we don't know what it is.

(03-13-2011, 05:46 AM)Namaste Wrote: Yes indeed, the Great Pyramid offers much, much more than electrical charge. Imagine viewing it with metaphysical eyes, watching the energy spiral and charge/change the physical.

(03-13-2011, 05:46 AM)Namaste Wrote: According to the research in the Pyramid Code (along with words from the knowledge keeper, who has passed away now), they used running water and sunlight to generate power.

(07-14-2011, 09:49 PM)Pickle Wrote: You are describing orgone technology LoL. It is easy to build your own device for testing. I use them for reasons of energy and amplification.

You can combine with tesla coil to power things.

(07-15-2011, 01:31 AM)Pickle Wrote: Some pieces I have built put out a measurable EMF field. Other than that, I usually use these for etheric reasons, either shielding or adding growth to plants.

I have read of a teacher showing a class demo, using a tesla coil. Powered with a 9 volt battery it lit up a high output flourescent on the other side of the classroom. It sent out enough energy through the air. So that tells me you need very little "juice" to put out good energy from a tesla coil.

Now, the piezoelectric effect of a crystal comes out when pressure is applied to a crystal. Which is what happens in an orgone generator. Orgone itself is a "type" of energy, which apparently if condensed enough can become visible. Orgone is created with layers of organic and metal. Layers of organic material and metal can be done in a cylinder shape, like a capacitor. A capacitor needs voltage input to produce an output, but maybe not when an orgone generator is used.

A test would be to use a type of orgone generator, to pressurize the crystal, with leads coming out of it that can hook up to a tesla coil. I would assume the coil will have a different output power based on its size. It is also possible to make a layered device that utilizes the energy of the sun as an output, but don't know for sure if actual voltage will be produced rather than just "light radiation". The orgone device would need to be built somewhat like a capacitor, rather than just a bunch of shavings. I think the orgone device with leads in the right placement running to a tesla coil will produce a good possibility of energy. The energy radiating from the tesla coil then possibly powering electrical devices. It would be pretty cool since there would be no battery to deplete.

A small thing to think of is the spark in certain lighters. The voltage for the spark is generated by an instant of pressure to quartz.

(07-15-2011, 01:07 AM)Bring4th_Steve Wrote: I saw the pic of the crystal in your helmet wrapped in copper. How did you know how many times to wind the coil, or do you just throw everything together to see what kind of effect it produces?

Can you also stage a bunch of materials together to see how effective the combinations are before casting it all in resin and turning it into a paperweight?

I've also read many stories how orgone can be monitored and "seen", which has often resulted in people capturing black silent helicopters and other weird surveillance phenomena where there normally isn't any (this is especially true when people build huge, multi-pipe cloud busters). Have you had any experiences that might give me reason to be concerned in terms of working with the material or even attempting to buy it?

(07-15-2011, 01:37 AM)Bring4th_Steve Wrote: Have you come across any good sites that offer up a ton of links for those who wish to investigate further?

Also, you didn't mention yet... Have you had any interesting "encounters" by being such a heavy user of the orgone material?

(07-15-2011, 11:08 AM)Pickle Wrote: Another energy device would be to combine two types of electric motors, like an alternator with a motor. Combining an efficient design that takes less input to create an output would give you a self powered setup. Not sure what kind excess wattage would be usable, but the idea is valid.
A gas powered generator has a gas motor to power the windings that produce electricity. The gas motor could be replaced with an electric motor if it was high torque and super efficient. It would just need a pull start or battery start to get it turned over enough to run itself. That would be a decent project if you can locate the right input/output rated parts.

Quote:Piezoelectricity is found in useful applications such as the production and detection of sound, generation of high voltages, electronic frequency generation, microbalances, and ultrafine focusing of optical assemblies. It is also the basis of a number of scientific instrumental techniques with atomic resolution, the scanning probe microscopies such as STM, AFM, MTA, SNOM, etc., and everyday uses such as acting as the ignition source for cigarette lighters and push-start propane barbecues.

Quote:High voltage and power sources

Direct piezoelectricity of some substances like quartz, as mentioned above, can generate potential differences of thousands of volts.
The best-known application is the electric cigarette lighter: pressing the button causes a spring-loaded hammer to hit a piezoelectric crystal, producing a sufficiently high voltage electric current that flows across a small spark gap, thus heating and igniting the gas. The portable sparkers used to light gas grills or stoves work the same way, and many types of gas burners now have built-in piezo-based ignition systems.
A similar idea is being researched by DARPA in the United States in a project called Energy Harvesting, which includes an attempt to power battlefield equipment by piezoelectric generators embedded in soldiers' boots. However, these energy harvesting sources by association have an impact on the body. DARPA's effort to harness 1-2 watts from continuous shoe impact while walking were abandoned due to the impracticality and the discomfort from the additional energy expended by a person wearing the shoes. Other energy harvesting ideas include harvesting the energy from human movements in train stations or other public places[17][18] and converting a dance floor to generate electricity.[19] Vibrations from industrial machinery can also be harvested by piezoeletric materials to charge batteries for backup supplies or to power low power microprocessors and wireless radios.[20]
A piezoelectric transformer is a type of AC voltage multiplier. Unlike a conventional transformer, which uses magnetic coupling between input and output, the piezoelectric transformer uses acoustic coupling. An input voltage is applied across a short length of a bar of piezoceramic material such as PZT, creating an alternating stress in the bar by the inverse piezoelectric effect and causing the whole bar to vibrate. The vibration frequency is chosen to be the resonant frequency of the block, typically in the 100 kilohertz to 1 megahertz range. A higher output voltage is then generated across another section of the bar by the piezoelectric effect. Step-up ratios of more than 1000:1 have been demonstrated. An extra feature of this transformer is that, by operating it above its resonant frequency, it can be made to appear as an inductive load, which is useful in circuits that require a controlled soft start.[21] These devices can be used in DC-AC inverters to drive cold cathode fluorescent lamps. Piezo transformers are some of the most compact high voltage sources.

Quote:Piezoelectric materials generate electricity when the dimensions are forced to change under stress. But just during the change.

Quote:In gas lighters you obtain several thousand volts (2-5 kV) and currents of the other of 1 mA (very short in duration).
It is very unpleasant to touch the spark point.